What is sectional view in engineering drawing?
A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.
What is sectional view explain different type of sectional views?
This is the most common section (called a full section) with the imaginary laser cutting a line across the entire construction, offering a view of a portion of the building with the rest of it put to one side. Half sections or views. In this type of section, only half of the space or object is cut away.
What are the 6 types of sectional views?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.
What is the advantage of sectional view?
They improve visualization of designs, clarify multiviews and facilitate dimensioning of drawings. Hence they are an important aspect of design and documentation. Section views are created by defining an imaginary cutting plane or planes on the object so that the observer can see the internal details.
What is the sectional view?
A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that can not be clearly described by hidden lines in exterior views. By taking an imaginary cut through the object and removing a portion, the inside features may be seen more clearly.
How is sectional view obtained?
The view obtained by cutting an object with an imaginary cutting plane is called Sectional View. The surface produced by cutting the object by the section plane is called Section. It is indicated by thin section lines uniforemly spaced, generally at an angle of 45′.
What is sectional plan?
A Sectional Plan displays the layout/outline of buildings of an existing or proposed Sectional Title Scheme. Sectional Plans are prepared by a land surveyor or architect in accordance with the provisions of the Sectional Titles Act. A Sectional Plan must be registered at the Offices of the Surveyor General.
What is sectional top view?
What are the two important features of sectional view?
Rule 1: A section lined area is always completely bounded by a visible outline. Rule 2: The section lines in all areas should be parallel. Section lines shown in opposite directions indicate a different part. Rule 3: All the visible edges behind the cutting plane should be shown.
What is a sectional view?
Which of the following is a type of sectional view?
There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections. …
What is a sectional view in engineering?
Sectional views reveal hidden details in a mechanical drawing. These views assume that a cutting plane has removed portions of the object represented by the drawing, displaying the appropriate section of the interior. Sectional views are used in engineering and architectural drawings.
What are the different types of sectional views?
Types of Sectional Views Full Section. If the imaginary cutting plane passes through the entire object, splitting the drawn object in two with the interior of the object revealed, this is called a “full Half View. Offset View. Revolving View. Broken View.
What is a full section view?
Full Section. A sectional view obtained by assuming that the object is completely cut by a plane is called a full section or sectional view. Figure a shows the view from the right of the object shown in Fig. a, in full section.
What is section view drawing?
A section view is a view used on a drawing to show an area or hidden part of an object by cutting away or removing some of that object.