What is a Class 4 vehicle?
Class 4. This includes most road vehicles: Cars (with up to eight passenger seats) Private passenger vehicles (up to 12 passenger seats) Goods and services vehicles with a gross weight of up to 3,000kg.
What is a Class 4 M1?
category M1 vehicle A vehicle with 4 or more wheels used for the carriage of passengers, with no more than 8 passenger seats in addition to the driver’s seat. This includes dual purpose vehicles, motor caravans and ambulances.
What does test Class 4 mean on MOT?
What is a class 4 MOT? The MOT test checks that your vehicle meets road safety and environmental standards. Class 4 MOTs are suitable for: cars, small vans and motor caravans (up to 3,000kg).
What is the maximum weight for a Class 4 MOT?
|Vehicle class||Age first MOT needed (years)|
|Cars (up to 8 passenger seats)||4||3|
|Quads (max unladen weight 400kg – for goods vehicles 550kg and max net power of 15kw)||4||3|
|Dual purpose vehicles||4||3|
What is the difference between a Class 4 and Class 7 MOT?
A class 4 MOT is the most common one and the MOT required on all passenger cars, whilst a class 7 MOT is usually carried out on commercial goods vehicles that carry between 3,000 kg and 3,500 kg in weight.
What is class5 MOT?
What is a Class 5 vehicle? Class 5 MOT testing covers private passenger vehicles with 13 or more seats, playbuses and ambulances. A class 5A test covers these vehicles with the inclusions of a seatbelt installation check.
What is a large Class 4 MOT?
Large class 4 vehicles A ‘large class 4 vehicle’ is a class 4 vehicle (M1 or N1) with a DGW greater than 2,500kg. You’ll need to carry out extra checks set out in the various sections of the inspection manual.
What is a Class 5 mot?
What is the difference between a Class 4 and Class 7 mot?
Is 3000 kg a Class 4 MOT?
Class 4 MOT It’s your standard MOT for most cars or motor vehicles that have up to 8 passenger seats. This also includes taxis & private hire cars, ambulances, motorhomes, campervans, most vans & smaller commercial vehicles that weight up to 3,000KG.
What class MOT is a car?
Dependent on the type of vehicle you drive there are two choices of MOT either a Class 4 or Class 7 MOT Test. A class 4 MOT is the most common one and the MOT required on all passenger cars, whilst a class 7 MOT is usually carried out on commercial goods vehicles that carry between 3,000 kg and 3,500 kg in weight.
What is a Class 4 M3?
Category M3 vehicle A vehicle with four or more wheels used for the carriage of passengers , comprising more than 8 passenger seats in addition to the driver’s seat and a maximum DGW exceeding 5000kg.
Where can I get a Class 4 MOT Bay?
Your MOT Bay Installation project manager will also assist you in liaising with VOSA (Vehicle and Operator Services Agency) ensuring that the installation of your class 4 ATL Bay runs as smoothly as possible from start to finish. Garage Equipment Online stocks brand new Class Four ATL MOT Bays from the GEO range of garage equipment.
How big does a MOT Bay need to be?
Mot bays should be adequately illuminated. Your MoT bay should have a clearance of at least 1.0 metre at the front end of lift 1.5 metres at the rear of a lift or pit to any entrance/exit door or wall. Your MoT equipment package cannot have walls or partitions inbetween adjacent MoT test bays.
What is the minimum headroom for a MOT lift?
Minimum headroom of 3.5m (except over an MoT lift ) A class 7 MoT bay has a minimum headroom requirement of 4.8 metres from the lift platform when in the fully lowered position with a class 4 MoT bay having a minimum headroom requirement of 3.8 metres measured from the platform surfaces when fully lowered.
How many parking bays are needed for MOT test?
at least two off-road parking bays, or more if necessary, clearly marked as being for MOT test vehicles; The parking bays should be on hard standing each being not less than 4.5m by 2.5m marked by lines on the ground. If the average throughput is high (say over