What does a Power Commander 3 do?

What does a Power Commander 3 do?

The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock.

What do the buttons on a power commander do?

Note the position of the indicator light on the “Fuel Richness Gauge.” The three buttons along the bottom of the Power Commander represent the “High,” “Mid” and “Low” areas of your engine’s rpm range. As you press each button, the Fuel Richness Gauge will display a quantity for each of the three areas.

How much horsepower does a Power Commander 3 add?

The Power Commander is a tuning tool to adjust fuel, and on some models ignition timing. Just adding a Power Commander to a completely stock vehicle usually does not increase peak horsepower. It usually will improve drivability, throttle response, and mid-range horsepower and torque.

How do I add maps to Power Commander 3?

Clicking on the “Open Map File” button will bring up this window. Click the map file you wish to open. The notes for that map file will be displayed in the lower notes area. After a map file is opened, click on the “Send Map” button to send the map to the Power Commander.

How do you turn off a power commander 3?

Unplug the PC lead from the ECU, unplug the ECU lead from the PC and then plug the ECU lead into the PC. Then you can remove the PC device from your bike.

How does the Power Commander work?

A Power Commander is the name of a device, made by Dynojet, that enables you to adjust the fuelling on your motorcycle. This allows you to modify the stock settings and change the fuelling so that the air to fuel ratio can be set at an optimum level.

How do I adjust my Power Commander 3?

To adjust the buttons on your Power Commander III, follow the instructions below:

1. With the ignition off, hold down all three buttons on the Power Commander III unit.
2. While still holding down the buttons, turn on the ignition and start the bike.
3. Release the buttons.

How does the power Commander 3 USB work?

The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike’s system.

What kind of technology does power Commander use?

The Ignition Module uses “direct coil driver technology” and allows a high degree of timing adjustment. In the Power commander Control Center Software the user is able to advance or retard the ignition curve up to 10 degrees based on throttle position and RPM.

What can power commander do for your car?

Our Power Commander tuning device is a powerful device that can completely overhaul your driving experience. Attached to your vehicle as a piggyback device that optimizes your air/fuel ratio, this device can then be easily uninstalled to return to stock settings. Two-position map switching function built in (map switch not included)

What are the accessories for the power commander?

POWER COMMANDER ACCESSORIES. 1 Secondary Fuel Module. Allows for more adjustments on each individual fuel injector for tuning modified engines. 2 Wideband Commander. 3 Quickshifter. 4 Autotune. 5 Ignition Module.