How thick should disc rotors be?
The standard solid rotor is 12mm (0.472 inches) thick. It should not be ground to less than 10.5mm (0.413 inches). The standard vented rotor is 20mm (0.787 inches) thick and should be ground to no less than 18.5mm (0.728 inches).
What is the minimum thickness for brake discs?
All new brake discs are 45 mm thick. Providing continuous cracks are not apparent, minimum brake disc thickness is 37 mm. Brake discs should be replaced in pairs.
At what thickness should brake discs be replaced?
At the latest, brake pads should be replaced when they are worn down to a thickness of less than two millimetres. Most modern cars are fitted with wear indicators to warn drivers when replacement is due.
What is thickness of new rotors?
When you purchase a new brake pad, it has a standard thickness size of around 8-12 millimeters (½ inch). Over time, as your brake pad engages with the wheel rotor, the friction material will experience deterioration — resulting in pad wear.
How thick do rotors need to be to pass inspection?
Can you fail inspection for rotors? It requires removing at least 2 of the wheels and getting a measurement of thickness on the pads and rotors to determine if it will pass. The state legal limit is 2/32nds, if it’s below the 2/32nds specification, it will fail.
How do you tell if your rotors are too thin?
When a rotor is too thin, it overheats and warps, leading to an annoying vibration or pedal pulsation. When rotors were thicker, they could take the wear from the brake pads, be machined and still have enough metal left to dissipate the heat.
How thick are BMW rotors?
Need to buy parts for this project? Click here to order!
| Brake rotor minimum thickness | Front | Rear |
|---|---|---|
| E90 Normally-aspirated | 18.4mm (0.72 in) | 22.4mm (0.72 in) |
| E90 Turbocharged | 28.4mm (1.1 in) | 24.4mm (0.96 in) |
What can happen if a brake disc is too thin?
How thick should rear rotors be?
Ideally, your brake pads should be thicker than 6.4 mm (¼ inches) for proper functioning. If it’s thinner than this, consider getting a replacement soon. Most car mechanics also agree that the bare minimum brake pad thickness is 3.2 mm (⅛ inches).