How do I add RAM to my HP EliteBook 6930p?

How do I add RAM to my HP EliteBook 6930p?

No parts specified.

  1. Step 1 Battery Removal. Flip laptop over and locate the battery release button.
  2. Step 2 RAM (Expansion Slot) Locate the RAM expansion slot cover on the bottom of the laptop.
  3. Install RAM module into the RAM slot on an angle of around 30 degrees.

How old is HP EliteBook 6930p?

2008: August 11: 8530p, 8530w and 8730w; August 18: 2530p and 2730p; September 8: 6930p announced. 2010: January 6: 8440p, 8440w, 8540p and 8540w; March 1: 2540p and 2740p; March 24: 8740w announced.

Where is the RAM in HP Elitebook?

One is the expansion slot and accessible from the underside of the device, the other is the default location for factory installed RAM and is located under the keyboard.

Does HP Elitebook 6930p have camera?

Ports and Webcam In addition to the fingerprint reader and 2-megapixel webcam, the 6930p has three USB ports, a FireWire port, Ethernet and modem jacks, VGA, an ExpressCard/54 card slot, an SD/MMC reader, and headphone and microphone ports.

Is HP EliteBook good for gaming?

Unfortunately, this laptop won’t run games like Fortnite, Apex Legends, Minecraft, PUBG and GTA V. PCGameBenchmark reviews are based on how many of the best PC games a PC can run. This laptop can run 437 of the top 1000 games – so we give it a 43% rating.

Does HP EliteBook 6930p have HDMI port?

The 6930p contains all the basic ports, but nothing exciting. There is a 1394 FireWire port, but no DVI or HDMI. There are three USB ports, but there is no charging over USB when the laptop is switched off. There is also a MMC card reader slot on the front of the laptop.

Where is the RAM located on a HP laptop?

The memory module compartment is located on the bottom of most HP and Compaq notebook computers.

How disassemble HP EliteBook 6930P?

Then pull it out directly.

  1. Remove the screw.
  2. Hold it and pull it out.
  3. Then lift it up.
  4. Remove the remained screws on the bottom cover. Push down the keyboard clips. Uncover it upwards.
  5. Push down the keyboard clips.
  6. Uncover it upwards.
  7. Draw out the keyboard.
  8. Open it carefully. Do not pull the cables.

Share this post