Why is my Fisher and Paykel DishDrawer not draining?

Why is my Fisher and Paykel DishDrawer not draining?

Straighten any kinks along the hose that drains water from your DishDrawer™. If the kinks return, you may need to replace the hose. Clean the filter plate/drain filter. Aim to clean your DishDrawer™ at least once per month, including the drain filter plates.

What would cause a dishwasher not to drain?

It is quite common for a dishwasher to not drain because either the drain hose or the air gap (if the unit has one) is clogged up. Drain hose clogs commonly occur where the hose is attached to the main household drain line, or where the hose connects with the garbage disposer.

How do you test a dishwasher drain valve?

Use your multimeter to test the solenoid for resistance. Set your meter to the R x 1 setting. Place each of the meter’s probes on one terminal each. When the probes touch the terminals, the reading should change from a reading of infinity to a reading of approximately forty ohms.

Why will my GE dishwasher not drain?

Common two reasons in 80% of cases for GE dishwasher to not able to drain includes jammed drain pump motor by solid food bits and clogged drain hose under the sink. Other possible reasons in 20% of cases include obstructed air gap, an improperly installed garbage disposal, or a damaged drain pump motor or impeller.

How do I know if my dishwasher drain pump is clogged?

Disconnect the hose from the pump (if you’re unsure where it is or how to disconnect it, consult your owner’s manual). To check the hose for clogs, simply blow through it. If air won’t pass through, you’ve got a clog.

How do you reset a Fisher and Paykel DishDrawer?

Reset Procedures for the Fisher & Paykel Dishwasher

1. Press the power button to turn off power to the Fisher & Paykel dishwasher.
2. Wait a few minutes and then press the power button to restore power.
3. Turn off and unplug the dishwasher if the issue remains.
4. Wait five minutes and restore power to the unit.

What to do if your Fisher and Paykel dishwasher is not draining?

If your Fisher & Paykel dishwasher is failing to drain properly, you can attempt to get things moving again by following a few simple steps. Obtain a copy of the instruction manual for your specific model of Fisher & Paykel dishwasher.

What does F3 mean on a Paykel dishwasher?

Similarly, the F3 error codes refers to problem with temperature sensor. We will cover solution for the each of the Fisher and Paykel Dishwasher error codes in details with respective solution in future.

What should I do if my DishDrawer drain is not working?

Straighten the hose and look through it. If you can see obstructions, the drain hose is likely the cause of your drainage problems. Flush out all of the debris with very hot water from the sink, then replace the drain hose, tightening it well at both connection points. Look up the pump assembly in the manual.