Popular guidelines

Why is my AC on but not blowing cold air?

Why is my AC on but not blowing cold air?

If your central AC is not blowing cold air, the refrigerant may be the problem. The unit could be running low and need additional refrigerant added. The most likely cause of this is a leak. A leak not only keeps the AC unit from cooling properly, but also it can cause other issues within the home.

Why is my Mazda AC not working?

While there are a variety of reasons your Mazda 3 air conditioning won’t work, the most common 3 are a refrigerant leak, an electrical climate control issue, or a problem with the air conditioning compressor.

How do I know if my AC capacitor is bad?

The most common signs and symptoms of a bad AC capacitor include:

  1. AC not blowing cold air.
  2. AC takes a while to start once you turn it on.
  3. Humming sound coming from your air conditioner.
  4. AC shuts off on its own.
  5. AC won’t turn on.

Where is the cabin air filter on a 2009 Mazda 3?

Cabin air filter is located outside of car on the passenger side. Mazda 3 maintenance interval. You need to replace Mazda 3 cabin air filter every 40.000 km (25.000 milles) or 2 years.

Where is the fuse box in a 2009 Mazda 3?

The fuse box is located on the front passenger’s side below the glove box (remove the glovebox bottom, turn the two clips and lower the fuse box down).

What could be wrong with my AC in my car?

There are several things that can cause electrical problems for your car’s air conditioning. These can include failed switches, a blown fuse, a problem with the control module or something else. Fuses can short out and make the A/C stop working or a loose connection can create an electrical short that is easily fixed.

Why is my air con leaking on my Mazda 6?

When the air conditioning in your Mazda 6 air-con blows hot air, you likely have a refrigerant leak. The most common fault on the Mazda 6 air conditioning system. Is the discharge air-con hose leaking at the ferrule crimp. This hose is repairable by cutting off old ferrules and welding new ones on and replacing the rubber hose section.

What are the worst problems with a 2009 Mazda6?

Worst 2009 Mazda MAZDA6 Problems #1: Excessive Subframe Flaking/Rusting 2009 MAZDA6 Average Cost to Fix: $1,100 #2: Engine Failure 2009 MAZDA6 Average Cost to Fix: $3,000 #3: Ongoing Electrical And Computer Problems 2009 MAZDA6 Average Cost to Fix: N/A

Why is my air conditioner not working properly?

If they seem to work fine but have effect on the air then the problem is probably a simple blown fuse. If the controls do not work correctly then the problem is probably with the control panel. If you cannot hear the sound that accompanies turning the air from low to high then the problem is likely with the blower motor.

What was the model year of the Mazda6?

CarComplaints.com Notes: The MAZDA6 was redesigned for the 2009 model year. Like any first-year product, it has a few growing pains – most notably a shiny, melting dashboard that can blind the driver. This data is from the NHTSA — the US gov’t agency tasked with vehicle safety.

Share this post