What are transverse curtains?
Traverse curtain rods are a mechanized track system product that allows the user to open or close their curtains with a pull of a string.
What is a traverse rod and track?
Traverse rods have clips or eyes that move along a track embedded in a slot in the rod. The eyes have a small opening for the curtain pins and they’ll run evenly across the rod, with the number of eyes dependent on how long the rod is. A cord runs through the rod, too, and is attached to a master slide or pulley.
What does curtain rod projection mean?
Projection is the measurement of the full extension of the curtain rod bracket, front to back, from the mounting plate to the outer point/end. It is measured from the front of the bracket back to the wall. This is the overall extension of the bracket, front to back.
Who makes traverse curtain rods?
Kirsch
Kirsch Decorative Traverse Curtain Rods are as functional as they are beautiful. Kirsch offers the Estate Traverse Rod Collection in Wood and Metal, in both 1 3/8 inch and 2 inch options.
What is the proper placement of curtain rods?
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.
Do you need middle bracket on curtain rod?
Most rods require support brackets every 30 to 36 inches. If your window is longer than 60 inches across, you’ll need two center support brackets. You can get single or double center support brackets depending if you’re hanging one or two layers of curtains.
How do you measure curtains for traverse rod?
Standard traverse rods are only used for pleated draperies. Measure the width of the rod from end to end, this is the face width or rod width. At the ends of the rod, measure the distance from the front of the rod to the wall, this is the return.
Can you use grommet curtains on a traverse rod?
Traverse rods are often installed pretty close to the wall. Grommet drapes typically need more depth since they have to accommodate the fabric that folds back to the wall.
How do you center a traverse rod?
Pull on the draw cord to close the drape, the primary carrier will traverse until the drapery or curtain panel on that side is fully extended. If the rod was properly installed to match the width of the curtain, the carrier will be in the center of the rod. Center Draw Traverse Rod Seen From the Back.
How do traverse rods work?
A traverse rod uses a continuous loop of cord to pull the master carrier into an open or closed position with individual carriers pushed or pulled along behind the master carrier. Drapes attach to the master carrier and individual carriers via drapery pins.
How do curtain rods work?
Eyes and Hooks. Each plastic eye on the track has a small round opening to allow a curtain hook to be linked onto it. When hanging the curtains the sharp hook is first embedded into the top seam of the curtain and then linked onto the eye. This is the sole controlling connection between the rod and the curtains and facilitates their opening and closing.
What does traverse rod mean?
Definition of traverse rod. : a metal rod or track with a pulley mechanism for drawing curtains.