Common questions

What are the prerequisites for deploying Hyper-V Replica?

What are the prerequisites for deploying Hyper-V Replica?

Deployment steps

  • Step 1: Set up the Hyper-V hosts. You’ll need at least two Hyper-V hosts with one or more virtual machines on each server.
  • Step 2: Set up the firewall. To allow replication between the primary and secondary servers, traffic must get through the Windows firewall (or any other third-party firewalls).

What are two requirements for a Hyper-V host?

Hyper-V has the following system requirements listed as a minimum:

  • 64-bit processors with Second Level Address Translation.
  • Minimum 4 GB memory.
  • Virtualization support enabled in BIOS/UEFI.

Which are the requirements for enabling Hyper-V?

General requirements

  • A 64-bit processor with second-level address translation (SLAT). To install the Hyper-V virtualization components such as Windows hypervisor, the processor must have SLAT.
  • VM Monitor Mode extensions.
  • Enough memory – plan for at least 4 GB of RAM.
  • Virtualization support turned on in the BIOS or UEFI:

Why is the Hyper-V Replica Broker required?

Provide centralized management of the replication settings For a cluster on the replica site, the replication settings are configured via the Replication Settings which is available on clicking the Broker role in the Failover cluster console.

What is Hyper-V Replica Broker?

by Karim Buzdar. Hyper-V replica is a built-in feature of a Hyper-V role which is used to asynchronously replicate a selected virtual machine at a primary site to a designated replicated site. It is a complete disaster recovery solution and it is easy to deploy.

Which is a basic requirement for a processor to be able to run the hypervisor in Windows Server 2016?

General Requirements A processor that’s 64-bit and supports Second-Level Address Translation (SLAT). This is required for virtualization, but not for Hyper-V management tools. At least 4 GB of RAM, preferably more, and higher amounts for multiple VMs. VM Monitor Mode extensions.

What are the basic requirements of virtualization?

What are the hardware requirements for a virtualization server?

  • CPU. The three elements to consider when selecting virtualization hardware include the CPU, memory, and network I/O capacity.
  • Memory. Your virtual machine resides in memory.
  • Network Access.
  • Other Considerations for Your Virtualization Server.

Does Hyper-V require Vt D?

You ONLY need VT-x with SLAT, which all chips in the last 5 years support, for Client Hyper-V. You won’t be able to use certain features like TPM or VM dedicated network cards, but you don’t need them outside Server systems anyway.

How do I create a replication in Hyper-V?

and when the console opens, Right Click on your Hyper-V Host and choose Hyper-V Settings. Repeat this step on both Hyper-V hosts. Import these certificates on both Hyper-V Hosts. Replication wizard starts and click next….Setting up Windows Server 2016 Hyper-V VM Replication

  1. Server Manager.
  2. Tools.
  3. Hyper-V Manager.

What is Hyper-V replica server?

Hyper-V Replica is a free in-built feature in Hyper-V 3.0 for disaster recovery. Hyper-V replication enables you to set up a Virtual Machine to replicate from one Hyper-V host to another Hyper-V Host which you can recover easily within minutes in case of a disaster.

What do I need to run a Hyper-V replica?

To take advantage of the Hyper-V Replica, which is included as part of the Hyper-V server role, the following pre-requisites must be met: A Windows Server 2012 computer with Hyper-V Role enabled/installed. The hardware that supports the Hyper-V Role.

Do you need firewall exception for Hyper V replica?

Microsoft offers one-liner PowerShell commands to configure Hyper-V Replica quickly without spending too much of time in GUI. A firewall exception is mandatory for Hyper-V Replica. Please note default port 80 for HTTP and 443 for HTTPS are already enabled in the Windows Firewall. The firewall rules just need to be enabled.

Where does the replication go in Hyper-V cluster?

In the case with Hyper-V, the replication goes not only between the hosts but between the clusters as well. It doesn’t matter where exactly replicated hosts are, whether it would be different networks or different domains. First things first.

What’s the difference between PowerShell and Hyper V replica?

The HTTP or HTTPS authentications are provided by the Network Module implemented in the Hypervisor. Hyper-V Replica can be configured for different networks also. It allows you to configure Hyper-V Replica for Replica Server running in the different network subnet. PowerShell is just robust as Unix shell today.

Share this post