Common questions

How many pins does 7404 have?

How many pins does 7404 have?

The IC 7404 consists of fourteen pins each pin are shown below.

Which are power pins in IC 7404?

74LS04 IC PIN CONFIGURATION Details

PINS DETAIL
6Y Pin 12 Pin 12 will give the output of the sixth inverter.
6A Pin 13 Pin 13 will use as the input pin for the sixth inverter.
VCC Pin 14 Pin 14 will use as the power pin. It will use to provide the power to the IC, to make it functional.

What is the functioning of 7th and 14th pins in IC 7404?

14th pin is the Vcc and the 7th pin is the Ground. The outputs directly interface to CMOS, NMOS and TTL. It supports wide operating conditions and has large operating voltage range. The datasheet for NOT gate IC 7404 is available at 7404 IC datasheet.

What is pin configuration of not gate?

As of circuit diagram an inverter gate has one output for one input. In this NOT gate circuit we are going to pull down both input of a gate to ground through a 1KΩ resistor. And then the input is connected to power through a button. So when the button is pressed the corresponding pin of gate goes high.

How many gates does 7404 have?

Six independent NOT gates
The 7404 is a high-speed CMOS Logic Quad NOT Gate. The 7404 is also known as Hex inverter. The contains Six independent NOT gates in one package.

How many gates are there in 7404 IC?

Six
The 7404 is a high-speed CMOS Logic Quad NOT Gate. The 7404 is also known as Hex inverter. The contains Six independent NOT gates in one package. The NOT gate consists of only one input and one output.

What is the function of IC 7404?

7404 is a NOT Gate IC ,This a 14 pin DIP version of the popular NOT Gate IC. 7404 is a NOT gate IC. It consists of six inverters which perform logical invert action. The output of an inverter is the complement of its input logic state, i.e., when input is high its output is low and vice versa.

What is a 7404 IC?

What are the pin numbers of the outputs of the gates in a 7404 IC?

7404 – 7404 Hex Inverter Datasheet

Pin Number Description
1 A Input Gate 1
2 Y Output Gate 1
3 A Input Gate 2
4 Y Output Gate 2

How many logic gates are there in HD 7404 p?

NOT gates, 7404 It consists of six inverters which perform logical invert action, with single input and single output pin. The output of an inverter is the complement of its input logic state, i.e., when input is high its output is low and vice versa.

Does NAND gate have 4 inputs?

The CD4012 is 4-Input NAND Gate IC. It can take in four logic inputs and provide an output based on the truth table. NAND gate is commonly used in buffer circuits and logic inverter circuits for digital communication.

What kind of pin configuration does IC 7400 have?

The frequently used logic gate IC is IC 7400 with AND gate. This logic gate includes 4-independent NAND gates by typical pin arrangement. It can operate at 70 o C temperature. The applications of IC 7400 include the following. Thus, this is all about an overview of IC 7400.

Which is the ground on a 7404 NOT gate IC?

Pinout diagram of 7404 is given below. Each 7404 has 6 NOT gates arranged as shown in the following figure. 14th pin is the Vcc and 7th pin is the Ground. Recommended operating conditions of 7404 is given in the following table. Supply voltage should be less than 5.25V and greater than 4.75V.

Can a control 7404 be used with a switch?

Circuit to control 7404 using switch is given below. 5V is supplied from an Arduino board or from 7805 Voltage regulator. Each 7404 has six NOT gates. Any NOT gate can be used in the circuit.

What kind of charging module does tp4056 use?

TP4056 module is a linear charger lithium-ion batteries. This module can charge batteries consists of single cells. Most importantly, it supports constant current and constant voltage modes of charging operations. Users can select both modes.

Share this post