Can I replace my Drayton thermostat?

Can I replace my Drayton thermostat?

Yes. It looks like the same model. It should be a straight swap on the same back plate.

How does a Drayton thermostat work?

How does a room thermostat work? A room thermostat works by sensing the air temperature. It is connected to the boiler so will switch the heating ON when the room temperature falls below the thermostat setting and OFF once the set temperature has been reached.

How do you override Drayton Digistat?

When in Auto mode you can override the existing temperature setting by pressing + or -. During adjustment the temperature will flash then stop. The Digistat+3 will now control at this temperature until the next programmed time/temperature event is reached, when the Digistat+3 will revert back to Auto mode.

What should I set my thermostat to in the spring?

On cooler spring days, set your heat to 68 degrees when you wake and while at home. When you leave, lower your heat to 60 degrees. On warmer days, your thermostat should be set to 78 degrees while awake and at home.

How does Drayton digistat digital room thermostat work?

Drayton’s Digistat+ RF601 digital wireless room thermostat has the brilliant setback feature that allows you to reduce the set temperature easily with just one button press, tactile and audible click feedback on the control dial and a digital display allowing temperatures to be easily monitored.

Are there any manuals for the Drayton rf601?

User Manuals, Guides and Specifications for your Drayton RF601 Thermostat. Database contains 2 Drayton RF601 Manuals (available for free online viewing or downloading in PDF): Installation manual .

How long does a digistat + RF battery last?

Power supply Digistat+ RF: 2 X 1.5V IEC LR6 (AA) alka Battery life Digistat+RF: approx. 2 years Mounting Digistat+ RF: Suitable for surface or co Wiring Designed for fixed wiring only, to compl Switch type & rating SCR (receiver): SPDT (volt free) 2 (1)A

What’s the standard range for a digistat thermostat?

30m typically. The range may be affected by the composition / density and number of walls between the thermostat and receiver Designed for fixed wiring only, to comply with current IET wiring regulations (BS7671).

How do you know if the thermostat is not working?

The most common signs of a broken thermostat are: The thermostat display is off or is non-responsive when you try to adjust it. The display on the digital screen is faded or incomplete. The furnace or air conditioner does not respond when you adjust your thermostat.

What would cause a thermostat to stop working?

Look for and address simple reasons why the thermostat isn’t getting power, such as dead batteries or a tripped breaker or blown fuse in your main electrical service panel. If you’re certain it’s receiving power, shut off the thermostat breaker in order to safely take off the cover and examine the inner components.

How do I set the temperature on my thermostat?

Set the heat. Setting the heat for your thermostat is very similar to setting the cooling option. Use the same switch or button to cycle through until you reach “heat.” You can then use the same set of arrows you used to set the cooling temperature to set the heating temperature.

Does the Drayton thermostat have a battery?

The Drayton Digistat is a digital thermostat for your home. The digital interface on the thermostat is powered by two AA batteries. If the batteries drain down, you’ll notice a “Low Battery” warning and you’ll be unable to control the thermostat. Changing the batteries takes about five minutes.

Share this post